Water and energy loss put pressure on the water industry
According to World Economic Forum 2017, a water crisis is evaluated as one of the highest risks to the world and with the largest impact.
As populations grow, pressures mount and finding a more sustainable relationship between water and energy supplies become critical in less than two decades.
Today, close to one third of the world’s population is estimated to live in water stressed and scarcity areas and by 2040, almost 20 % of all countries are anticipated to experience extremely high water stress.
Yet, water and energy loss in the water sector are extremely high. In fact, the average amount of water wasted by waterworks is 40 % worldwide and 26 % in Europe – due to errors, leakages, and water pressure.
At the same time, 4 % of global electricity is consumed by the water industry – a figure that is expected to double by 2040 – and water accounts for up to half of a municipality’s total energy bill.
Meet the DST P10B #CANopen pressure transmitter featuring an embedded communication module.
This means you can access new sensor data and optimize application performance.
New DST P140 Pressure Transmitter
The DST P140 pressure transmitter is designed to provide unrivaled reliability, durability, performance, and not least, digital possibilities in the water-pump market.
Today’s challenges Tomorrow’s achievements
The industry challenges reflect a growing need for efficient water supply and treatment.
The good news is that technologies to reduce energy consumption and leakages in all stages of the water cycle – from production and distribution to wastewater pumping and treatment – already exist.
Pressure management is key throughout the water cycle
Global Director at Danfoss Drives Segment, Mads Warming, explains why there is a need for more efficient water supply and treatment on a global scale.
Pressure control is key to reduce water and energy loss
Danfoss pressure sensors and variable speed drives are a key component for reducing water and energy loss throughout the whole water cycle.
Experiences from 112 systems in 10 different countries show that better pressure control reduces non-revenue water and unnecessary energy consumption significantly.
In average, improved pressure management leads to 38 % reduction in pressure and 53 % less new breaks. Among other benefits, the energy consumption is reduced by 20-40 % and the typical water leakage reduction is 38 %. Moreover, the improvements result in extended asset lifetime and fewer network related complaints.
Danish water utility sets new standards for sustainability
The Danish water utility, Aarhus Water, is running with only 6 % leakage. Danfoss has contributed through the whole water cycle.
Bringing water and energy use into balance
The increasing global demand for water and energy has put immense pressure on both industries to find a path towards a more sustainable future. And pressure itself is the key to achieving this goal.
Related products
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }MBS 3000 general purpose pressure transmitters
MBS 3000 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions.
The flexible pressure transmitter programme covers all standard output signals. -
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }MBS 1700 semi-flexible pressure transmitter
Pressure transmitter, type MBS 1700 is designed to a variety of applications and easy installations within the distributor market. The transmitter offers highly reliable pressure measurement, ensuring that even the slightest change is detected immediately.
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }DST P40I titanium pressure transmitter for use in corrosive environments and with aggressive media
For use in corrosive environments and with aggressive media, Danfoss offers the robust DST P40I pressure transmitter made of Titanium and with ceramic pressure sensing element. DST P40I is optimized for use in applications such as desalination systems, seawater cooling, and chemical processing.
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }DST P10B CANopen, Smart Sensor pressure transmitter with an CANopen DS 301/DS 404 communication profile
The DST P10B CANopen pressure transmitter built on the DST P1XX product range with a CANopen DS 301/DS 404 communication profile—empowering you to add sensors to your existing high-level fieldbus communication in water distribution, air compressor, and HVACR applications.
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }KP / KPI, pressure switches for light industry
Danfoss KPI pressure switches are used for regulating, monitoring and alarm systems in industrial applications. The KP series are suitable for plant in connection with liquid and gaseous media.
Case stories
The worldwide first energy-neutral catchment area
The Marselisborg catchment area in Aarhus has achieved 100 % energy surplus production - by minimizing consumption throughout the whole water cycle and maximizing energy production from the wastewater facility.
Articles
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }How a new water pumping station keeps supply flowing in Bern
SWITZERLAND: The Wehrliau pumping station in Bern delivers up to 1.20 M liters of drinking water hourly. iC7 drives play a key role in ensuring reliable supply.
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }Carlsberg brewery drives down energy consumption
POLAND: For more than a decade, Danfoss drives have reduced the power consumption at Carlsberg’s Okocim Brewery. The brewery uses less water and has lowered its emissions, too.
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }Driving efficient life support systems at Lodz Zoo
POLAND: The Lodz Zoo Orientarium uses high-efficiency VLT® AQUA Drive FC 202 to secure reliable water quality in life support systems for rare animal species.
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }Danfoss drives prevent coastline flooding
NETHERLANDS: Efficient variable speed pump control using drives from Danfoss is the key to reliable flood prevention in Noordoostpolder municipality in the Netherlands.
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }Danfoss efficiencies help South African farmer to free up energy and achieve production goals
SOUTH AFRICA: Discover how a South African farmer achieves 155,000+ kWh in annual energy savings thanks to a collaboration between Danfoss and BMG.
-
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }Rock-solid reliability underpins sustainable aquaculture at Nordlaks
NORWAY: VLT® AQUA Drive FC 202 ensures dependable uptime with stringent harmonic compliance at Nordlaks Smolt AS.
Contact us
For further information, please contact us.