Trainings at Danfoss Marine Competence Center

Marine Competence Center from the outside

Trainings

Whether you are just getting started or need a quick refresher on the basics within the maritime industry, these courses provide you with the fundamental understanding of our Danfoss offering. We build your competence, enhance safety, develop your troubleshooting skills, and help you maximize the performance of your drives and power converters at sea.

All trainings are in-person at our Marine Competence Center in Holmestrand, Norway. Browse through our training offerings below or contact us for more information.

Learning

Introduction to iC7 product training

Dive into the world of advanced power electronics with our Introduction to the iC7 Series course. This training is designed for professionals seeking a thorough understanding of the iC7-Marine, iC7-Hybrid, and Liquid-Cooled System Modules. The course covers the product functionality, system design, and integration processes that enable high-performance power management in marine and hybrid applications.

The training has a maximum capacity of 6 people attending. If fewer than 4 people are registered, we will reschedule the timing.

Content and Duration

Throughout this course, participants will learn about:

iC7 Series Product Functionality
- Overview of iC7-Marine and iC7-Hybrid products
- Key features and advantages of the iC7 Series in marine and hybrid applications
Liquid-Cooled System Modules
- Design considerations for integrating liquid-cooled systems into marine and hybrid vessels
System Design and Enclosure Integration
- Key aspects of designing modular systems for ease of installation, maintenance, and performance optimization
Software Introduction to different applications
Fieldbus topics, Setting up fieldbus connection
Hands on session

This practical, hands-on course provides participants with the knowledge to successfully work with iC7 Series products, from system integration to performance optimization. The training is three days, starts 8.30 and ends 16.00 each day. Please note that we will conduct 50-minute sessions and 10-minute breaks for all days.

Please contact mcc.no@danfoss.com if you have any questions.

Read more and register

Advanced Editron training

Unlock the full potential of Editron products with our comprehensive training course.

This session is designed for professionals looking to deepen their knowledge of Editron's hardware and software solutions, covering everything from product range overviews to the different inverter applications, commissioning and troubleshooting.

The training has a maximum capacity of 6 people attending. If fewer than 4 people are registered, we will reschedule the timing.

Content and Duration

Throughout this training, participants will explore:

Editron Product Overview

Introduction to the different Danfoss Editron product ranges

Including hardware options and different configurations
Cooling specifications for optimal performance

Introduction to PowerUSER (software interface)

Learn how to connect and see the different interfaces

Key considerations when working with high power electronics and machinery

Applications and software

Basic parameters and operations for the following applications

Motor control application

Experience how to operate in local control and add load

AFE (line converter) control application
Grid control application
DCDC control application

Introduction for CAN-bus operated systems
Full Editron system control setup

Take a look into the different possibilities how to operate the different applications in a full system

Service, maintenance and troubleshooting

Troubleshooting basics and fault diagnosis
Setting up and reading fault logs
Identifying the most common faults and their solutions
Regular maintenance procedures to ensure long-term performance

This hands-on training provides you with the necessary skills to confidently work with Editron products, from initial setup to routine service and troubleshooting.

The training is 2,5 days, starts 8.30 and ends 16.00 each day - 13.00 last day. Please note that we will conduct 50 minute sessions and 10 minute breaks for all days.

Please contact mcc.no@danfoss.com if you have any questions.

Read more and register

Introduction to Editron Product Training

Unlock the full potential of Editron products with our comprehensive training course. This session is designed for professionals looking to deepen their knowledge of Editron's hardware and software solutions, covering everything from product range overviews to motor inverter commissioning and troubleshooting.

The training has a maximum capacity of 6 people attending. If fewer than 4 people are registered, we will reschedule the timing.

Content and Duration

Throughout this training, participants will explore:

Editron Product Overview
- Introduction to the different Editron product ranges
- Hardware options and configurations
- Cooling specifications for optimal performance
- Key considerations when working with high-power electronics and machinery
Software and Connectivity
- Overview of the software interface
- How to connect and configure the system
- Understanding basic drive and parameter information
Motor Inverter Commissioning
- Basic parameters used to control a motor
- Operating a motor in local control and adding load
Service and Maintenance
- Troubleshooting basics and fault diagnosis
- Setting up and reading fault logs
- Identifying the most common faults and their solutions
- Regular maintenance procedures to ensure long-term performance

This hands-on training provides you with the necessary skills to confidently work with Editron products, from initial setup to routine service and troubleshooting. The training is 1,5 days(day 1 0830-1600, day 2 0830-1300), starts 8.30 and ends 16.00 each day. Please note that we will conduct 50 minute sessions and 10 minute breaks for all days.

Please contact mcc.no@danfoss.com if you have any questions.

Read more and register

Basic introduction to marine electrification

Join our basic introduction training and get an exclusive deep-dive into the world of marine electrification. This course is tailored to provide essential insights and skills. Our basic course is relevant for all professionals with an interest in drives and power converters for marine.

The training has a maximum capacity of 6 people attending. If fewer than 4 people are registered, we will reschedule the timing.

Content and duration

During the training, you will learn more about:

System design, applications, and components
VACON® NXP AFE/Grid Converter and how to facilitate load sharing
VACON® NXP DCGuard and how to utilize DC grids instead of AC grids to improve system efficiency and system footprint by up to 20%
VACON® NXP DC/DC Converter and how to help improve performance by making better use of energy

The training is three days, starts 8.30 and ends 16.00 each day. Please note that we will conduct 50 minute sessions and 10 minute breaks for all days.

Price: 1,000 EUR

Please contact mcc.no@danfoss.com for more information and registration.

Danfoss products in use during training.

Advanced learning focusing on design in the maritime industry

Embark on a journey in the maritime industry with our comprehensive course on advanced learning focusing on design in the maritime industry. This training is tailored for professionals seeking an in-depth understanding of design principles and practical applications within the maritime sector.

The training has a maximum capacity of 6 people attending. If fewer than 4 people are registered, we will reschedule the timing.

Content and duration

During the training, you will learn more about:

Designing solutions for electrification using drive systems in a Common DC setup
MyDrive® Select, to support dimensioning of drive systems
Insights into the latest technologies shaping the future of maritime design engineering
How to ensure that your designs meet marine-specific compliance requirements
Introduction to Editron Drives

The training is three days, starts 8.30 and ends 16.00 each day. Please note that we will conduct 50 minute sessions and 10 minute breaks for all days.

Price: 1,000 EUR

Please contact mcc.no@danfoss.com for more information and registration.

Training attendees getting advanced hands-on training at Danfoss MCC.

Advanced learning focusing on applications in the maritime industry

This course is tailored for project engineers, electrical engineers, and commissioning engineers, with a deep-dive into the topics of commissioning and tuning of maritime electrification systems. Building upon your foundation of basic application knowledge of AC/DC and VACON DCGuard, you will gain insights and practical skills essential for ensuring optimal performance and efficiency within marine electrification.

The training has a maximum capacity of 6 people attending. If fewer than 4 people are registered, we will reschedule the timing.

Content and duration

During the training, you will learn more about:

Gain hands-on experience in configuring and fine-tuning electrical systems for optimal performance
How VACON DCGuard integrates with advanced maritime electrification systems
Practical simulations in commissioning and tuning maritime electrical systems
Introduction to Editron Drives

The training is three days, starts 8.30 and ends 16.00 each day. Please note that we will conduct 50 minute sessions and 10 minute breaks for all days.

Price: 1,000 EUR

Please contact mcc.no@danfoss.com for more information and registration.

People at the training sitting and listening to a presentation

Advanced learning with focus on service

Learn more about troubleshooting, maintenance and how to repair marine inverters in this advanced training. We zoom in on service and how you keep your drives going. Please contact us via mcc.no@danfoss.com for more information.

Expert Learning Customized Content

With a deep dive into specific system configuration and needs, we will focus on your systems and offer you a tailored learning based on your needs. Please contact us via mcc.no@danfoss.com for more information.

Danfoss employee and an attendee at the training talking

Master Instructor Level

We help you to become an instructor, certified by the Danfoss Marine Competence Center. If you are interested in learning more about this training, please contact us via mcc.no@danfoss.com for more information.

Unsure which course to join? Check out the table below

FAQ

Welcome to our FAQ section, where we address common queries and provide essential information about our marine training offerings. If you do not find the answers you seek, feel free to reach out to our dedicated support team for any open questions you may have.

Will I receive a certificate upon completion of the training?

Yes. For all our trainings, we offer a certificate recognizing your achievement. If you have any further questions or need additional details about the certificate process, please do not hesitate to contact our support team.

How do I get there?

We recommend using the airport Oslo Airport Gardermoen. To travel to Holmestrand, please take the train from Gardermoen to Holmestrand station (1 hour and 25 minutes). From here, you can take a taxi from the station to Bentsrudveien 17, 3083 Holmestrand (7 minutes).

If you require a taxi, please use these numbers:

When arriving in Holmenstrand, please call Vestfold Taxisentral at +47 33 42 02 00
When arriving in Oslo, please call Oslo Taxi at +47 02323
When arriving in Sandvika, please call Asker og Bærum taxi at +47 06710

Where should I stay (hotels)?

We recommend staying at Quality Hotel Tønsberg (Tönsberg), located at Ollebukta 3, 3126 Tønsberg. The hotel is located approximately 30 minutes by car from the Marine Competence Center. When booking, please use Danfoss as a reference to get the Danfoss rate.