Analogue controllers

The product range of controls for outdoor is equipped with a temperature sensor which switches on the electric heating when needed. Ice and snow melting systems are different and require different thermostats/regulators. Analog controllers are thermostats with temperature sensors, allowing the system to switch on and off depending on settings.

DEVIreg™ 316 / ECtemp 316

DEVIreg™ 316 / ECtemp 316 is a simple electronic thermostat with enhanced functionality which can be installed in electric cabinets with a DIN rail attachment. The thermostat is mainly used for frost protection on roofs, in gutters and downpipes. It can be also used to control ventilation, cooling or snow melting on ground, pipe tracing and similar installations.

Applications:
• Roofs, gutters, downpipes, drain lines
• Ground, walkways, outdoor steps
• Pipe frost protection
• Tank frost protection
• Sprinkler systems

DEVIreg™ / ECtemp 330

DEVIreg™ / ECtemp 330 is a line of simple electronic thermostats to be installed in electric cabinets with a DIN rail attachment. To measure and control the desired temperature either a wire sensor (in the set) or an external indoor/outdoor air sensor must be used. The thermostat must be installed via an all-pole disconnection switch. It has a LED indicating standby (green light) and heating (red light) periods.

Applications:
• Roofs, gutters, downpipes, drain lines
• Pipe frost protection
• Tank frost protection
• Sprinkler systems

DEVIreg™ 610 / ECtemp 610

DEVIreg™ 610 / ECtemp 610 is an electronic thermostat suitable for many different indoor and outdoor applications. It is water resistant and can be mounted on any plain surface e.g. directly on the pipe.

Applications:
• Pipe frost protection
• Tank frost protection
• Sprinkler systems

Features and benefits using outdoor analogue controllers

DIN rail and surface installation

Low temperature area

Low standby consumption

Large application area

LED indicator

Terminals for NO/NC connection

Related products

if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Heating Mats

The outdoor heating mats are designed for melting ice and snow and may be installed into special mastic for ground, grass and asphalt constructions. Mats are available in different lengths for two power supply options—230 and 400 V.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Heating Cables

Heating cables are used for a variety of applications, including indoor comfort floor heating and total heating both for small houses as well as large commercial buildings.
Heating cables are mostly used in connection with new building or larger renovation projects.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Self-limiting Cables

The self-limiting heating cables for indoors are used for maintenance of the hot water supply and other fluids that need to maintain a certain temperature. The self-limiting capability of the cable ensures that the output increases or decreases according to the surrounding temperature. It ensures hot water in all taps, providing savings compared to a circulatory hot water system.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Heating Mats

The heating mats are used for installation in a thin layer of tile adhesive, self-leveling mixture, or similar. The standard minimum thickness of the floor layer is 5-8 mm while the thickness of electric heating mat is 3–4.5 mm. This minimizes the floor level increase. Electric heating mats consist of a thin cable securely fixed on self-adhesive glass-fiber mesh, usually of 50 cm width. Thin heating mats are manufactured as ready-made heating sections with a specific area (i.e. 0.5, 1, 1.5 … 12 m²) including a power supply cable (cold lead) and hermetically sealed connections.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Analogue controllers

Analogue controllers are thermostats with temperature sensors allowing you to switch the system on and off depending on settings.

Accessories

Relevant accessories

Find relevant accessories by following this link

Accessories in Product store

Videos

Safe Ground and Roof with Danfoss Heating Cables

Danfoss has designed versatile outdoor solutions for pipe heating, roof and gutter, and ground heating that can be installed on virtually any type of construction including private, business and institutional buildings.

Snow melting and De-Icing solutions from Danfoss

Durably-designed Danfoss snow melting and de-icing products provide a permanent solution for safety in winter weather

Electric heating videos on YouTube

You can see all our videos about Electric Heating on a dedicated playlist on YouTube. Follow the link below.

Go to the Electric Heating playlist on YouTube

Documents

Documents
Type	Name	Language	Valid for	Updated	Download	File type
Data sheet	Danfoss ECtemp 316	English	Multiple	17 Jul, 2023	495.4 KB	.pdf
Data sheet	Danfoss ECtemp 330	English	Multiple	17 Jul, 2023	721.7 KB	.pdf
Application guide	Danfoss Ground application. Ice & Snow Melting Application manual	English	Multiple	11 Nov, 2020	7.5 MB	.pdf
Application guide	Danfoss Pipe Frost Protection	English	Multiple	17 Feb, 2021	10.4 MB	.pdf
Catalog	Danfoss Product catalogue	English	Multiple		20.8 MB	.pdf
Application guide	Danfoss Roof application. Frost protection Application manual	English	Multiple	06 Sep, 2022	14.4 MB	.pdf
Application guide	Danfoss Sports Field Heating	English	Multiple	11 Nov, 2020	932.4 KB	.pdf
Application guide	DEVI Ground Application manual	Lithuanian	Multiple	29 Nov, 2019	8.2 MB	.pdf
Application guide	DEVI Ground Application manual	English	Multiple	25 Oct, 2016	10.2 MB	.pdf
Application guide	DEVI Ground Application manual	Russian	Kazakhstan	14 Sep, 2020	8.3 MB	.pdf
Application guide	DEVI Ground Application manual	Swedish	Sweden	22 Jun, 2022	8.3 MB	.pdf
Application guide	DEVI Ground Application manual	Danish	Denmark	03 Jun, 2021	2.7 MB	.pdf
Catalog	DEVI Product Catalogue	German	Austria	25 Apr, 2024	6.4 MB	.pdf
Catalog	DEVI Product Catalogue	Norwegian Bokmål	Norway	28 Jun, 2022	13.6 MB	.pdf
Catalog	DEVI Product Catalogue	Finnish	Finland	12 Feb, 2024	32.9 MB	.pdf
Catalog	DEVI Product Catalogue	English	Multiple	14 Mar, 2024	28.4 MB	.pdf
Catalog	DEVI Product Catalogue	Finnish	Finland	04 Mar, 2022	10.4 MB	.pdf
Catalog	DEVI Product Catalogue	Ukrainian	Ukraine	13 Dec, 2024	13.0 MB	.pdf
Catalog	DEVI Product Catalogue	Finnish	Finland	25 Jan, 2023	30.6 MB	.pdf
Catalog	DEVI Product Catalogue 2022	Latvian	Latvia	29 Mar, 2022	3.1 MB	.pdf
Application guide	DEVI Roofs Application manual	English	Multiple	06 Sep, 2022	14.9 MB	.pdf
Application guide	DEVI Roofs Application manual	Russian	Kazakhstan	15 Sep, 2020	14.8 MB	.pdf
Application guide	DEVI Roofs Application manual	Danish	Denmark	03 Jun, 2021	3.5 MB	.pdf
Application guide	DEVI Roofs Application manual	Swedish	Sweden	26 Feb, 2021	15.0 MB	.pdf
Application guide	DEVI Roofs Application manual	Ukrainian	Ukraine	15 Sep, 2020	14.9 MB	.pdf
Data sheet	DEVIreg 316	German	Multiple	19 Mar, 2021	376.9 KB	.pdf
Data sheet	DEVIreg 330	German	Multiple	19 Mar, 2021	491.8 KB	.pdf
Data sheet	DEVIreg™ 316	French	France	03 Oct, 2024	191.6 KB	.pdf
Data sheet	DEVIreg™ 316	Romanian, Moldavian, Moldovan	Romania	16 Feb, 2016	177.3 KB	.pdf
Data sheet	DEVIreg™ 316	Danish	Denmark	19 Oct, 2022	308.6 KB	.pdf
Data sheet	DEVIreg™ 316	English	Multiple	22 Feb, 2024	188.5 KB	.pdf
Data sheet	DEVIreg™ 316	Ukrainian	Ukraine	24 Dec, 2021	75.5 KB	.pdf
Data sheet	DEVIreg™ 330	French	France	03 Oct, 2024	556.3 KB	.pdf
Data sheet	DEVIreg™ 330	Ukrainian	Ukraine	24 Dec, 2021	97.4 KB	.pdf
Data sheet	DEVIreg™ 330 - 10°C to +10° C	English	Multiple	22 Feb, 2024	553.2 KB	.pdf
Data sheet	DEVIreg™ 330 - 10°C to +10° C	Czech	Czech Republic	30 Oct, 2015	180.6 KB	.pdf
Data sheet	DEVIreg™ 330 - 10°C to +10° C	Romanian, Moldavian, Moldovan	Romania	16 Feb, 2016	180.0 KB	.pdf
Data sheet	DEVIreg™ 330 - 10°C to +10° C	Danish	Denmark	19 Oct, 2022	591.1 KB	.pdf
Data sheet	ECtemp 316	Romanian, Moldavian, Moldovan	Romania	18 Jul, 2017	417.7 KB	.pdf
Data sheet	ECtemp 316 (EFET 316)	German	Austria	09 Jul, 2019	1.8 MB	.pdf
Data sheet	ECtemp 330	Romanian, Moldavian, Moldovan	Romania	18 Jul, 2017	381.8 KB	.pdf
Data sheet	ECtemp 330 (EFET 330)	German	Austria	09 Jul, 2019	3.7 MB	.pdf
Data sheet	ECtemp 610	English	Multiple	17 Jul, 2023	393.7 KB	.pdf
Data sheet	ECtemp 610	German	Austria	09 Jul, 2019	1.8 MB	.pdf
Data sheet	ECtemp 610	Romanian, Moldavian, Moldovan	Romania	18 Jul, 2017	344.1 KB	.pdf
Application guide	Наземне застосування. Танення льоду та снігу	Ukrainian	Ukraine	14 Sep, 2020	8.3 MB	.pdf

Tools and apps

EH Plugin for AutoCAD

The Plugin supports your engineering and design journey by making your work faster due to simple functionalities in calculating all lengths, dimensions and product data of cables and mats. It covers all applications within Electric Heating projects: Electric floor heating, Ice & Snow melting systems, Pipe tracing, Cold stores, Sport fields, Vineyards etc.
By utilizing Plugin, you will reduce design time for the project, provide all necessary information for installers in HTML/PDF format: BoM, resistance value check list, warranty list format. It means all project information can be consolidated in one file.

Plugin can be used with AutoCAD 2021.

Warranty

At Danfoss, it is important for us to deliver high-quality products with long-lasting effects. Should you, against all expectations, experience a problem with your product, Danfoss offers a warranty for electric heating products valid from the date of purchase that was no later than 2 years from production date.

Depending on the product, the product guarantee is valid for two years, five years, or twenty years.

Product warranty covers costs for:

product replacement with a new comparable product or repair of the product
transportation costs

Warranty terms

Case studies

Coming soon...

Related applications

if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Agriculture

Farmers need agricultural machines that deliver the same high productivity every season. Hydraulic solutions from Danfoss ensure world-class performance from each machine - and a comfortable, stress-free working environment for their operators.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Fire fighting systems for automotive manufacturing

The Danfoss high-pressure water mist system for fire fighting offers increased protection for people and is the optimal fire fighting solution for highly sensitive equipment installed in a car factory.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Fire fighting systems for energy generating facilities

Danfoss high-pressure water mist for fire fighting is the optimal solution for energy generating facilities, such as power plants, wind turbines and biomass plants, to name just a few. High-pressure water mist technology is reliable and will activate fast in the event of a fire.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Fire fighting systems for marine and offshore

Complete fire fighting systems for marine and offshore provide optimum fire safety on board ships for passengers and crew, while protecting the assets and keeping downtime to a minimum.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Frost and snow protection

Danfoss systems are used in all frost protection applications in parking lots, garages, stairs, pavements and other ground-level surfaces, which can be secured against the negative effects of winter. Danfoss frost protection systems include all necessary products such as cables or heating mats, specialized controllers and mounting accessories.
if (isSmallPicture) { ; } else if (isBigColumns) { } else { }

Frost and snow protection

During winter time it can be hazardous to access commercial or public buildings. Snow covered parking lots, garage ramps, stairs and pavements need to be cleaned to allow visitors safe access. Danfoss offers highly effective frost and snow protection systems including all necessary products such as electric heating cables or mats, controllers, sensors and mounting accessories.