With Danfoss systems you never need to worry about legionella or insufficient or cold water in the bathrooms. Our domestic hot water solutions include water heaters that can be connected to multiple tanks as well as storage and charge systems, hot water valves that prevent legionella and temperature controllers. When used together, these combine the demand for high performance, comfort, hygiene and resource efficient operation – even during peak loads.
Freshwater systems for decentralized DHW heating are either used alone or integrated into a flat station. They only heat the domestic water when needed. If properly planned, the volume of piping between the freshwater system and the taps in an apartment will be below three liters (when legionella testing is not required).
Production of hot water
Production of hot water is done by one of our water heaters. These can be equipped with one or more storage tanks to provide enough hot water at peak loads. They can also be equipped with a storage charging principle. They meet hygienic, safety and temperature requirements and can be connected to different energy sources. Adding hot water valves and temperature controllers help prevent legionella. All together a high performance, comfortable, hygienic and resource efficient production of DHW is achieved.
Distribution of hot water
The hot water is then distributed to the water tap points. In most cases the size of the building requires a series of risers circulating the hot water. Our Thermal balancing valves ensure the proper hydronic balance that avoids long waiting times. As these control the water temperature they also avoid too hot water causing lime, corrosion and energy inefficiency. Normally these valves are set to a temperature that avoids legionella to grow.
Smart and energy efficient legionella risk reduction
The thermal balancing valves can be equipped with thermostatic or electronic disinfection modules, allowing periodic flushing of the system to kill the legionella bacteria. The electronic temperature registration system monitors all the temperatures and initiates the safe and energy efficient disinfection cycle. It also stores the temperature data for logging purposes. The electronic controller can be easy accessed on mobile devices using Wi-Fi or be integrated into Building Management Systems (BMS) for remote control, monitoring and alarm purposes.
Close to the water tap points, there is sometimes a need to lower the hot water temperature. Our hot water mixing valves ensure the outlet water temperature is safe for consumption.
How we can help you
One partner with high DHW expertise
High performance and energy efficiency
Resource efficient operation
Pass Legionella testing
Lowest possible operating costs
MTCV Thermal balancing valves with CCR2+ electronic controller
Establish safe and energy efficient DHW systems and control them remotely on a mobile device.
How to balance domestic hot water systems?
What are the issues and challenges in domestic hot water systems in non-residential buildings?See why hydronic balancing is important, what type of balancing is the best and how that can solve the issues.
Related products
-
if (isSmallPicture) {
MTCV Thermal balancing valves provide a dynamic, temperature based, balancing solution for drinking water applications. The valves prevent too high temperatures causing lime, corrosion and high energy costs. They also prevent too low temperatures where legionella risks increase and long waiting times for hot water to occur.
-
if (isSmallPicture) {
Thermostatic temperature controllers are used to control the flow temperature in instantaneous/storage domestic hot water and heating systems. In multi-family houses and commercial buildings, they are used for hot water systems and for return temperature limitation in district heating applications.
-
if (isSmallPicture) {
Thermal balancing valves provide a dynamic, temperature based, balancing solution for domestic hot water applications. The valves optimize the temperatures in DHW systems having constant hot water circulation. As result heat losses and risk of legionella are significantly reduced.
Case studies
-
if (isSmallPicture) {
Suzhou city was founded in 500 BC. It is nowadays a major city located in southeastern Jiangsu Province of East China, about 60 miles northwest of Shanghai. It is a big economic centre and local point of trade and commerce, and the second largest city in the province, after its capital Nanjing.
-
if (isSmallPicture) {
Until 2014, the apartments in this multi-family building located in the Hamburg suburb of Bergedorf were heated using electrical water heaters and supplied with domestic hot water using electrical instantaneous water heaters. Now, after the renovation, a block heating station in the basement of the building provides heating distributed via flat stations installed in the stairwell and used for decentralized domestic hot water. Tenants were able to stay in their apartments throughout the renovation process.
Learning
